Part Number : NPD04S
802.3af/at Active POE 12V/19V/24V Gigabit Splitter
 |
PCBA Model : ( BPL-1513 )
Only PCBA Board
 |
Introduction
The 802.3af/at POE 12V/19V/24V Splitter is designed to run Gigabit speed PoE cables over long distances. This device splits the PoE signal into separate data and power sources and relays them into non-PoE devices. Supports DC output voltage 12V, 19V and 24V via DIP switch three range adjustable. It delivers Power over Ethernet (Gigabit Ethernet) to remote devices. This PD splitter allows a non-POE compliant device to upgrade to PoE, it is used to deploy remote non-PoE device with no nearby AC outlets brings lots of convenient.
Highlight Features
- Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3at PoE+, IEEE 802.3af PoE standards.
- Max Power Transmission after split power & data : 27Watts for DC output.
- Supports 10/100/1000Mbps Gigabit Ethernet speed.
- DC Output Voltage: 12V / 19V /24V three range adjustable.
- With hardware protection design the device will not cause any damage while changing the voltage output during operation.
- Up to 100 meters (328 feet) application.
- Supports Ethernet PoE to Separate to only Power and only Data output.
- LED indicators for DC output voltage display of 12V/19V/24V.
- Over Voltage protection and Short Circuit Protection.
- Plug and Play, no software required
- Supports desktop or wall mounting installation and multiple units combination.
Hardware Specification
| Product | 802.3af/at POE 12V/19V/24V Splitter |
| Main Chip Solution | Microsemi PD70200 + LT3891 |
| Standard | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| Network Media | 10BASE –T: UTP Cat. 3 or up
100BASE-TX : UTP Cat. 5 or up 1000BASE-T: UTP Cat.5e or up |
| Data Transfer Rate | 10/100/1000Mbps (Half-duplex),
20/200/2000Mbps (Full-duplex) |
| Data Pin | 1/2, 3/6 & 4/5, 7/8 |
| PoE Type | Input : End-span (Type-A): PIN 1/2,3/6 ;
Mid-span (Type-B): PIN 4/5,7/8 |
| Power Interface | Input : RJ45 POE in
Output : DC out |
| Power Requirement | 44~57 PoE Power Source |
| DC Output Voltage | 12V/ 19V/ 24V three range adjustable |
| LED Definition | DC Output LED x3
l DC 12V output: 12V Light on l DC 19V output: 19V Light on l DC 24V output: 24V Light on |
| Temperature | Operating : 0° to 55° C ; Storage: -40° to 70° C |
| Humidity | Operating : 10% to 90% non-condensing
Storage: 5% to 90% non-condensing |
| Dimension
( W x D x H ) |
NPD04S : 84.48*80*39.5mm
BPL-1513 : 58.89*73mm |
| Weight | NPD04S : 99.8g
BPL-1513 : 48.4g |
| Case of material | ABS |
| Certifications | TBD |
** Specifications can be negotiated separately according to needs.
** Specifications can be negotiated separately according to needs.