Model Number : NG30T

802.3af/at Active POE Gigabit/Multi Gigabit Injector with STB connector ( External Type )

PCBA Model : BGT-1001

Only PCBA Board

Introduction

The PoE injector complying with IEEE 802.3af/at standard provides 10/100/1000Mbps/ Multi Gigabit Ethernet connection ability. The Power over Ethernet Injector provides DC 44-57V over Ethernet cables. It supports Auto detect PD power supply is powered by End-span (Type-A) or Mid-span (Type-B). This PoE adapter is designed to supply operational power to wireless LAN devices such as PoE access points, routers, and surveillance cameras. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T, IEEE 802.3af PoE and IEEE 802.3at PoE+ standard.
  • Supports Gigabit (10/100/1000M) /Multi Gigabit (1/2.5/5Gbps) RJ45 Ethernet Connection.
  • Auto detect PD power supply is powered by End-span (Type-A) or Mid-span (Type-B)
  • Provides both data and power for distances of up to 100 meters (328 feet) from the power source when using CAT 5 or up cabling.
  • Max Power : 30Watt (IEEE 802.3at) PoE+.
  • LED indicators with power pin display and power function enable.
  • Provide Screw Terminal Block and DC In both Power System.
  • Support PSE / PoE Power Over Ethernet function.
  • Over Current Protection and Short-circuit Protection.
  • Supports Desktop, Wall mounting Units Combination for easy to bundles organize the Ethernet cables.

Hardware Specification

Product 802.3af/at Active PoE Multi Gigabit Injector with STB Connector
Main Chip Solution IC+ IP802AR
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3bz 2.5G/5G BASE-T

IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet Plus (PoE+)

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1G/2.5G/5GBASE-T : UTP Cat.5e or up

Data Transfer Rate 10/100/1000/2500/5000Mbps (Half-duplex),

20/200/2000/5000/10000Mbps (Full-duplex)

PoE Type End-span (Type-A): PIN 1/2,3/6 ,

Mid-span (Type-B): PIN 4/5,7/8

Max. PoE 30Watt
Power Interface Input : DC In and STB In

Output : RJ45 PoE out

Power Requirement External Power Supply ,

Input Voltage: 44 ~ 57Volt

Power Supply Optional
LED Definition Power LED (Green) x1

l  Light On: Power on

l  Light Off: Power off

PoE LED: LED on RJ45 Jack (Green/Yellow) x2

l  Green On: End-span (Type A)

l  Yellow On: Mid-span (Type B)

Temperature Operating : 0° to 55° C , Storage: -40° to 70° C
Humidity 5% to 90% non-condensing
Dimension

( W x D x H )

NG30T : 64*51.66*24.07mm

BGT-1001: 37.2*45mm

Weight NG30T : 48g

BGT-1001: 28.2g

Case of material Plastic
Certifications FCC ,CE, RoHs compatible

**Specifications can be negotiated separately according to needs.

**Specifications can be negotiated separately according to needs.