Model Number : NG30T
802.3af/at Active POE Gigabit/Multi Gigabit Injector with STB connector ( External Type )
 |
PCBA Model : BGT-1001
Only PCBA Board
 |
Introduction
The PoE injector complying with IEEE 802.3af/at standard provides 10/100/1000Mbps/ Multi Gigabit Ethernet connection ability. The Power over Ethernet Injector provides DC 44-57V over Ethernet cables. It supports Auto detect PD power supply is powered by End-span (Type-A) or Mid-span (Type-B). This PoE adapter is designed to supply operational power to wireless LAN devices such as PoE access points, routers, and surveillance cameras. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device.
Highlight Features
- Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T, IEEE 802.3af PoE and IEEE 802.3at PoE+ standard.
- Supports Gigabit (10/100/1000M) /Multi Gigabit (1/2.5/5Gbps) RJ45 Ethernet Connection.
- Auto detect PD power supply is powered by End-span (Type-A) or Mid-span (Type-B)
- Provides both data and power for distances of up to 100 meters (328 feet) from the power source when using CAT 5 or up cabling.
- Max Power : 30Watt (IEEE 802.3at) PoE+.
- LED indicators with power pin display and power function enable.
- Provide Screw Terminal Block and DC In both Power System.
- Support PSE / PoE Power Over Ethernet function.
- Over Current Protection and Short-circuit Protection.
- Supports Desktop, Wall mounting Units Combination for easy to bundles organize the Ethernet cables.
Hardware Specification
| Product | 802.3af/at Active PoE Multi Gigabit Injector with STB Connector |
| Main Chip Solution | IC+ IP802AR |
| Standard | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3bz 2.5G/5G BASE-T IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE+) |
| Network Media | 10BASE –T: UTP Cat. 3 or up
100BASE-TX : UTP Cat. 5 or up 1G/2.5G/5GBASE-T : UTP Cat.5e or up |
| Data Transfer Rate | 10/100/1000/2500/5000Mbps (Half-duplex),
20/200/2000/5000/10000Mbps (Full-duplex) |
| PoE Type | End-span (Type-A): PIN 1/2,3/6 ,
Mid-span (Type-B): PIN 4/5,7/8 |
| Max. PoE | 30Watt |
| Power Interface | Input : DC In and STB In
Output : RJ45 PoE out |
| Power Requirement | External Power Supply ,
Input Voltage: 44 ~ 57Volt |
| Power Supply | Optional |
| LED Definition | Power LED (Green) x1
l Light On: Power on l Light Off: Power off PoE LED: LED on RJ45 Jack (Green/Yellow) x2 l Green On: End-span (Type A) l Yellow On: Mid-span (Type B) |
| Temperature | Operating : 0° to 55° C , Storage: -40° to 70° C |
| Humidity | 5% to 90% non-condensing |
| Dimension
( W x D x H ) |
NG30T : 64*51.66*24.07mm
BGT-1001: 37.2*45mm |
| Weight | NG30T : 48g
BGT-1001: 28.2g |
| Case of material | Plastic |
| Certifications | FCC ,CE, RoHs compatible |
**Specifications can be negotiated separately according to needs.
**Specifications can be negotiated separately according to needs.