Model Number : NG90I
802.3af/at/bt Active POE++ Gigabit/Multi Gigabit Injector ( Internal Type )
 |
Introduction
The NG90I Multi Gigabit PoE Injector complying with IEEE 802.3af/at/bt PoE++ standards and POE max power up to 90Watt. It provides DC 56 Volt over Ethernet cables and supports Multi Gigabit (1/2.5/5Gbps) Ethernet connection ability. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device.
- Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T, IEEE 802.3bt PoE++, IEEE 802.3at PoE+ and IEEE 802.3af PoE standards.
- Supports Multi Gigabit (1/2.5/5Gbps) Ethernet connection ability.
- Auto detect PD power pin is powered by End-span (Type-A) or Mid-span (Type-B) then powered to PD device.
- Provides both data and power for distances of up to 100 meters (328 feet) from the power source when using RJ-45 Ethernet cable.
- Internal power design and supports 56V PoE+ output.
- Max Power : 90Watt (IEEE 802.3bt) PoE++.
- Support PSE / PoE Power Over Ethernet function.
- Over Current Protection and Short-circuit Protection.
- Supports Desktop, Wall mounting Units Combination for easy to bundles organize the Ethernet cables.
Hardware Specification
| Product | 802.3af/at/bt Active POE++ Multi Gigabit Injector ( Internal Type ) |
| Main Chip Solution | Realtek |
| Standard | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3bz 2.5G/5G BASE-T IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE+) IEEE 802.3bt Power over Ethernet (PoE++) |
| Network Media | 10BASE –T: UTP Cat. 3 or up
100BASE-TX : UTP Cat. 5 or up 1000BASE-T: UTP Cat. 5 or up 1G/2.5G/5GBASE-T : UTP Cat.5e or up |
| Data Transfer Rate | 10/100/1000M/2500/5000bps (Half-duplex),
20/200/2000/5000/10000Mbps (Full-duplex) |
| PoE Type | End-span (Type-A): PIN 1/2,3/6
Mid-span (Type-B): PIN 4/5,7/8 |
| Max PoE | 90Watt |
| Power Interface | Input : AC In
Output : RJ45 Active PoE++ 56V out |
| Power Requirement | AC Power Code
Input Voltage : 100-240V , 50-60Hz |
| Power Supply | Internal Power Supply |
| LED Definition | Power LED (Green) x1
l Light On: Power on l Light Off: Power off PoE LED (Yellow) x1 |
| Temperature | Operating : 0° to 50° C
Storage: -40° to 70° C |
| Humidity | 5% to 90% non-condensing |
| Dimension ( W x D x H ) | NG90I : 164*67*42 mm |
| Weight | 240g |
| Case of material | Plastic |
| Certifications | FCC ,CE, RoHs compatible |
**Specifications can be negotiated separately according to needs.
**Specifications can be negotiated separately according to needs.