Model Number : NMG30
802.3af/at Active POE Gigabit/Multi Gigabit Injector ( External Type )
 |
PCBA Model : BMJ-1002
Only PCBA Board
 |
Introduction
The PoE injector complying with IEEE 802.3af/at standard provides 1/2.5/5Gbps Multi Gigabit RJ-45 Ethernet connection ability. The Power over Ethernet Injector provides DC 44-57V over Ethernet cables. It supports Auto detect PD power supply is powered by End-span (Type-A) or Mid-span (Type-B). The Power over Ethernet (POE) adapter is designed to supply operational power to wireless LAN devices such as PoE access points, routers, and surveillance cameras. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device.
Highlight Features
- Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T standard and IEEE 802.3af PoE, IEEE 802.3at PoE+.
- Supports 1/2.5/5Gbps Multi Gigabit RJ45 Ethernet Connection.
- Auto detect PD power supply is powered by End-span (Type-A) or Mid-span (Type-B)
- LED indicators with power pin display and power function enable.
- Low cable-loss and remote power feeding up to 100 meters.
- Over Current Protection and Short-circuit Protection.
- Supports wall mounting and multiple units combination.
Hardware Specification
| Product | 802.3af/at POE Multi-Gigabit Injector |
| Main Chip Solution | IC+ IP802AR |
| Standard | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3bz 2500/5000BASE-T IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE+) |
| Network Media | 100BASE-TX : UTP Cat.5 or up
1000BASE-T: UTP Cat.5e or up 2.5G/5GBASE-T : UTP Cat.5e or up |
| Data Transfer Rate | 100M/1G/2.5G/5G (Half-duplex),
200M/2G/5G/10G (Full-duplex) |
| PoE Type | End-span (Type-A): PIN 1/2,3/6
Mid-span (Type-B): PIN 4/5,7/8 |
| Power Interface | Input : DC In
Output : RJ45 PoE out |
| Power Requirement | External Power Supply ,
Input Voltage: 44 ~ 57Volt |
| Power Supply | Optional |
| LED Definition | Power LED (Green) x1
l Light On: Power on l Light Off: Power off PoE LED: LED on RJ-45 Jack (Green/Yellow) x2 l Green On: End-span (Type A) l Yellow On: Mid-span (Type B) |
| Temperature | Operating : 0° to 55° C , Storage: -40° to 70° C |
| Humidity | 5% to 90% non-condensing |
| Dimension
( W x D x H ) |
NMG30 : 64*51.66*24.07mm
BMJ-1002 : 37.2*45mm |
| Weight | NMG30 : 36.8g
BMJ-1002 : 19g |
| Case of material | ABS |
| Certifications | FCC ,CE, RoHs compatible |
**Specifications can be negotiated separately according to needs.
**Specifications can be negotiated separately according to needs.