Part Number : NMGT
Proprietary 4Pair High Power Passive POE Gigabit/Multi Gigabit Injector with STB connector ( External Type )
 |
PCBA Model : BMJ-1006
Only PCBA Board
 |
Introduction
The Proprietary 4Pair high power passive POE Multi-Gigabit Injector with STB connector provides 802.3af/at/bt power level. It supports the latest High Power Hardware design through 4Pair UTP Ethernet Cable to deliver both data and power to PD devices. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device and provides Multi-Gigabit (1/2.5/5Gbps) Ethernet connection ability.
Highlight Features
- Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T standard.
- Supports 1/2.5/5Gbps Multi-Gigabit Ethernet speed.
- Passive PoE.
- Provides Passive High Power PoE output ability up to 802.3bt power level.
- Support PSE / PoE Power Over Ethernet function.
- Provide Screw Terminal Block plug in or DC plug in Interface.
- Low cable-loss and remote power feeding up to 100 meters.
- Over Current Protection and Short-circuit Protection.
- Supports wall mounting and multiple units combination.
- Plug-and-Play, requires no configuration.
Hardware Specification
| Product | Proprietary 4Pair high power passive POE Multi-Gigabit Injector with STB connector ( External Type ) |
| Standard | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000Base-T IEEE 802.3bz 2.5G/5GBASE-T |
| Network Media | 100BASE-TX : UTP Cat.5 or up
1000BASE-T: UTP Cat.5e or up 2.5G/5GBASE-T : UTP Cat.5e or up |
| Data Transfer Rate | 100M/1G/2.5G/5G (Half-duplex),
200M/2G/5G/10G (Full-duplex) |
| PoE Type | End-span (Type-A): PIN 1/2,3/6
Mid-span (Type-B): PIN 4/5,7/8 |
| Twisted-pair Used | 4Pair |
| Power Interface | Input : DC In or STB In
Output : RJ45 PoE out |
| Power Requirement | External Power Supply
Input Voltage: 12 ~ 57Volt Output Voltage : Depends on input voltage |
| Power Supply | Optional |
| LED Definition | System: Power (Green) x1
l Light On: Power on l Light Off: Power off |
| Temperature | Operating : 0° to 55° C
Storage: -40° to 70° C |
| Humidity | 5% to 90% non-condensing |
| Dimension
( W x D x H ) |
NMGT: 64*51.66*24.07mm
BMJ-1006: 37.2*45mm |
| Weight | NMGT: 44.6g
BMJ-1006: 27.2g |
| Case of material | ABS |
| Certifications | TBD |
**Specifications can be negotiated separately according to needs.
** Specifications can be negotiated separately according to needs.