Model Number : NISP
10KV POE Pass-Through Gigabit Indoor Surge Protector
 |
PCBA Model : BSU-1702
Only PCBA Board
 |
Introduction
The PoE Pass-through Ethernet Surge Protector provides superior lightening and surge protection over gigabit networks speeds to provide Gigabit Power-over-Ethernet (PoE) over a single Ethernet cable. It provides durable design featuring a higher surge capability and lower clamping voltage. And the 10 kA Impulse Discharge Current guarantees reliable surge protection. The PoE Pass-through Ethernet Surge Protector can function as a transmitter for a PoE switch to deliver power and data through an Ethernet cable. This device protects all 8 pins and is compatible with all types of RJ45 cables.
Highlight Features
- Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T standards.
- Provides 10/100/1000Mbps Gigabit Ethernet speed.
- Supports Power over Ethernet (PoE) pass through.
- Built in grounding pad which can connect to grounding cable to lower clamping voltage for better and more reliable protection.
- Load current self-protection mechanism and grounding wire function pulse discharge current protection design.
- Supports 10 kA Impulse Discharge Current.
- Supports 2 protection mode: Line-to-Ground and Line-to-Line.
- IEC/EN 61643-21 (Safety) Initial Pretest Passed.
- IEC/EN 61000-4-5 (EMC) Initial Pretest Passed.
- Protects all Eight (8) pins of the Ethernet cable.
- Plug and Play, no software required.
- Supports desktop, wall mounting and multiple units combination.
Hardware Specification
| Product | POE 10kA (20KV) Pass-through Gigabit Indoor Surge Protector |
| Standard | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T |
| Clamping Line-to-Ground | Common mode up to 10 kA |
| Clamping Line-to-Line | Differential mode up to 1 kA |
| PoE Pass through | 8pins all support PoE pass through |
| Surge Protection Design | 10KA |
| Maximum PoE Operation DC Voltage | 57 VDC |
| Maximum PoE Operation DC Current | Two pair : 0.65A (Max)
Four pair : 1.3A (Max) |
| PoE Power Load | 74Watt (Four Pair Max) |
| Temperature | Operating : -10° to 60° C
Storage: -20° to 65° C |
| Humidity | 5% to 90% non-condensing |
| Dimension
( W x D x H ) |
NISP : 84.48*80*39.5 mm
BSU-1702 : 44*73mm |
| Weight | NISP : 96.2g
BSU-1702 : 50g |
| Case of material | ABS |
| Certifications | IEC/EN 61643-21 (Safety) Initial Pretest Passed
IEC/EN 61000-4-5 (EMC) Initial Pretest Passed |
**Specifications can be negotiated separately according to needs.