Part Number : NDGT
POE Voltage booster to 802.3af/at Active POE Gigabit/Multi Gigabit Injector w/STB connector ( External Type )
 |
PCBA Model : BGT-2001
Only PCBA Board
 |
Introduction
The POE Voltage booster to 802.3af/at POE Multi Injector w/STB connector with voltage booster supports IEEE 802.3af/at standard and provides 10/100/1000Mbps Gigabit Ethernet connection ability. It supports a wide voltage input range DC 12~56V. It can be booster input voltage to 802.3af/at standard PoE 56V power output to PD device. Moreover, it supports End-span (Type-A) or Mid-span (Type-B) power pin designed, no matter the PD devices is designed Type-A or Type-B all can supply power automatically.
Highlight Features
- Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T,IEEE 802.3af PoE and IEEE 802.3at PoE+ standards.
- Supports 1/2.5/5G Multi Gigabit RJ45 Ethernet Connection.
- Supports wide temperature design (-40° ~ 75° C).
- Supports a wide range input voltages of 12~56V. It can be automatically boosted and converted to a standard PoE 56V power output.
- Supports PoE detector function (PoE Detector), LED indicator shows the status of PoE operation (Status).
- Auto detect PD power supply is powered by End-span or Mid-span power pin then powered to PD device.
- Max Power : 30Watt (IEEE 802.3at) PoE+.
- Support PSE / PoE Power Over Ethernet function.
- Provide Screw Terminal Block plug in or DC plug in Interface.
- Low cable-loss and remote power feeding up to 100 meters.
- Over Current Protection and Short-circuit Protection.
- Supports Desktop and wall mounting installation.
- Plug-and-Play, requires no configuration.
Hardware Specification
| Product | POE Voltage booster to 802.3af/at POE Multi Gigabit Injector w/STB connector |
| Main Chip Solution | IC+ IP802AR |
| Standard | IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3bz 2.5G/5G BASE-T IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE+) |
| Network Media | 100BASE-TX : UTP Cat.5 or up
1000BASE-T: UTP Cat.5e or up 2.5G/5GBASE-T : UTP Cat.5e or up |
| Data Transfer Rate | 100M/1G/2.5G/5G (Half-duplex),
200M/2G/5G/10G (Full-duplex) |
| PoE Type | End-span (Type-A): PIN 1/2,3/6 ,
Mid-span (Type-B): PIN 4/5,7/8 |
| Power Interface | Input : Screw Terminal Block In (for voltage Boost interface ) or
DC In (for PoE constant voltage input) Output : RJ45 Active PoE 56V Out |
| Power Requirement | External Power Supply
Input Voltage: 12 ~ 56Volt only for Screw Terminal Block In (Wide voltage range) Input Voltage: 44 ~ 57Volt only for DC In |
| DC Input Rating | 2.5A (Max) |
| Power Supply | Optional |
| LED Definition | Power x1
End-span x1 Mid-span x1 |
| Temperature | Operating : -40° to 75° C , Storage: -40° to 85° C |
| Humidity | 5% to 90% non-condensing |
| Dimension ( W x D x H ) | NDGT : 130*82*27mm
BGT-2001 : 73*70mm |
| Weight | NDGT : 251.8g ; BGT-2001 : 59.4g |
| Case of material | Metal |
| Certifications | TBD |
** Specifications can be negotiated separately according to needs.